Practical Components
dummy components, tools and kits
TSOP Type I / Type II
Thin Small Outline Package
Small Outline
- SOIC/SOJ Small Outline Integrated Circuit
- HSOP Heat Slug Automotive Power Pkg
- TSSOP Thin Shrink Small Outline Pkg—Amkor
- SSOP Small Shrink Outline Pkg—Amkor
- TSSOP Thin Shrink Small Outline Pkg
- PLCC Plastic Leaded Chip Carrier
TSOP packages are thin body size components; thickness is 1.0mm. TSOP packages have four sides and are rectangular. Type I TSOPs have the leads protruding from the width portion of the package. Type II TSOPs have the leads protruding from the length portion of the package. Lead counts range from 28 to 48. Package body size ranges from 8 x 14mm to 12 x 20mm.
| Type I — Thin Small Outline Package | |||||||
|---|---|---|---|---|---|---|---|
| Part Number | Number of Pins |
Body Size |
Lead Pitch |
Qty Per Tray |
Tape Width |
Tape Pitch |
Qty 13" Reel |
| TI-TSOP28-8.1x11.8mm-.55mm | 28 | 8.1 x 11.8mm | .55mm | 234 | 24mm | 12mm | 1,000 |
| TI-TSOP28/32-8x18.4mm-.5mm | 28/32 | 8 x 18.4mm | .5mm | 156 | 32mm | 12/16mm | 1,000 |
| TI-TSOP28-8x20mm-.5mm | 28 | 8 x 20mm | .5mm | 156 | — | — | — |
| TI-TSOP32-8x11.8mm-.5mm | 32 | 8 x 11.8mm | .5mm | 234 | — | — | — |
| TI-TSOP32-8x18.4mm-.5mm | 32 | 8 x 18.4mm | .5mm | 156 | 32mm | 12/16mm | 1,000 |
| TI-TSOP40-10x14mm-.5mm | 40 | 10 x 14mm | .5mm | 160 | — | — | — |
| TI-TSOP40-10x18.4mm-.5mm | 40 | 10 x 18.4mm | .5mm | 120 | 32mm | 16mm | 1,000 |
| TI-TSOP48-12x18.4mm-.5mm | 48 | 12 x 18.4mm | .5mm | 96 | 32mm | 16mm | 1,000 |
| Type II — Thin Small Outline Package | |||||||
|---|---|---|---|---|---|---|---|
| Part Number | Number of Pins |
Body Size |
Lead Pitch |
Qty Per Tray |
Tape Width |
Tape Pitch |
Qty 13" Reel |
| TII-TSOP20/26-7.6x17.14mm-1.27mm | 20/26 | 7.6 x 17.14mm | 1.27mm | 176 | 24mm | 12mm | 1,000 |
| TII-TSOP24/28-10.16x18.41mm-1.27mm | 24/28 | 10.16 x 18.41mm | 1.27mm | 100 | 32mm | 16mm | 1,000 |
| TII-TSOP32-10.16x20.95mm-1.27mm | 32 | 10.16 x 20.95mm | 1.27mm | 117 | 32mm | 16mm | 1,000 |
| TII-TSOP40/44-10.16x18.42mm-.8mm | 40/44 | 10.16 x 18.42mm | .8mm | 135 | 32mm | 16mm | 1,000 |
| TII-TSOP44-10.16x18.42mm-.8mm | 44 | 10.16 x 18.42mm | .8mm | 135 | 32mm | 16mm | 1,000 |
| TII-TSOP44/50-10.16x20.95mm-.8mm | 44/50 | 10.16 x 20.95mm | .8mm | 135 | 32mm | 16mm | 1,000 |
| TII-TSOP50-10.16x20.95mm-.8mm | 50 | 10.16 x 20.95mm | .8mm | 117 | 32mm | 16mm | 1,000 |
| TII-TSOP54-10.16x22.22mm-.8mm | 54 | 10.16 x 22.22mm | .8mm | 108 | 44mm | 16mm | 1,000 |
| TII-TSOP66-10.16x22.22mm-.65mm | 66 | 10.16 x 22.22mm | .65mm | 108 | 44mm | 16mm | 1,000 |
| TII-TSOP86-10.16x22.22mm-.5mm | 86 | 10.16 x 22.22mm | .5mm | 108 | 44mm | 16mm | 1,000 |
- Packaging is in JEDEC trays or tape and reel (quantities may vary).
- Body dimensions are measured by body length and width.
- Type I means that pins extend from narrow end (the width) end of the body.
- Type II means that pins extend from the wide end (the length) of the body.
- Tape type is plastic.
- Lead-free parts are available with 100% Sn finish or 98% Sn/2% Cu finish.
