Practical Components

Practical SMT Kit

PC Boards and Kits

• PC009-40 Aegis Traceability & Control Validation Kit
• Kit Identifier (component part/kit numbers)
• AIM Print Test Board and Kit
• Pb-Free HASL PCB Finish
• Custom PC Practice Boards and Kits
• CircuitCAM Software—Aegis
• Single Pack Hand Solder Kits
• PC000 Zero-Ohm SMD Resistor PCB/ Kit
• PC003 Solder Practice PCB/Kit
• PC005 BGA Variable Pitch and Array PCB/Kit
• PC007 MLF® Test PCB/Kit
• PC008 Solder Practice PCB/Kit
• PC009 Mixed Technology PCB/Kit
• PC011 BGA Fine Pitch PCB/Kit
• SMTA Saber Evaluation PCB/Kit
• PC012 BGA Global Daisy-Chain Test Kit
• PC013 Though-Hole Solder Training Kit
• PC014 IPC 9850 Attribute Defect Rate Kit
• PC015 Rework Kits
• PC016 IPC Compliant Hand Soldering Kit
• PC020 Practical SMT Kit
• PC200 PoP 14mm Board & Kit—Amkor
• PC200 PoP 12mm Board & Kit—Amkor
• WTK-1 Terminal and Wire Kit
• PC031 Lead-Free Process Capability Validation Kit—Cookson
• Flip Chip Test Die Kits—FlipChip Int'l
• µBGAPC Boards and Kits—Tessera
• Omni Training Kits
• Laser Cut Metal Mask Stencils

Nearly all package types are now available in lead-free formulations and dummy packages are available as small as 0402 metric.

FREE CATALOG

See our illustrated design guide/catalog for an extensive list of dummy components, SMD production tools and equipment, PCB practice kits and other products designed to save you money and improve your process.

PC020

(jump to PC020-T)

The Practical PC020 SMT Kit has a wide variety of surface mount components. The PC board is double-sided. The top side consists of Tin/Lead QFPs, SOICs, SSOP, TSOP and Flip Chip. Lead Pitch ranges from .65mm to .4mm. Line traces are built into the board to simulate live PC boards. This test board is an excellent tool for machine placement evaluation and rework training for fine pitch components. PC020T consists of components for the top side of the board only.

The bottom side of the board (not pictured) consists of 500 0805 pads and 500 1206 pads. Pads can be used for capacitors or resistors. Both the 1206 and 0805 pads are daisy-chained Zero Ohm Resistors that can be placed on the board to perform continuity test. This side of the PC board can be used to test high-speed passive component placement. The PC020B consists of components for the bottom side of the board only. The part number for both top and bottom side is PC020TB. This 4" x 5.5" size test board comes with a standard HASL finish.

This kit is only available Tin/Lead (not Lead-Free).

Board size: 4" x 5.5", IS-410 board material. HASL finish. Only Tin/Lead parts available (not Lead-Free)

Notes

• Gerber Data and X,Y Theta Data are available if required at no charge.
• Digitized files provided by Aegis Software included at no charge.

PC020T

We’ve made a new single-sided version of our PC020 that retains the most desirable components of the old board at a substantially reduced price. The Practical PC020T SMT Kit has a wide variety of surface mount components. The components used consists of Tin/Lead QFPs, SOICs, SSOP, TSOP and Flip Chips. Lead Pitch ranges from .65mm to .4mm. Each item is individually bagged and tagged for easy identification.

This kit is only available Tin/Lead (not Lead-Free)

Board size: 4" x 5.5", IS-410 board material. HASL finish. Only Tin/Lead parts available (not Lead-Free)

The PC board is single-sided. Line traces are built into the board to simulate live PC boards. This test board is an excellent tool for machine placement evaluation and rework training for fine pitch components.

Notes

• Gerber Data and X,Y Theta Data are available if required at no charge.
• Digitized files provided by Aegis Software included at no charge.