Practical Components
dummy components, tools and kits
PCB014 / PC014
IPC 9850 Attribute Defect Rate Kit
PC Boards and Kits
- PC009-40 Aegis Traceability & Control Validation Kit
- Kit Identifier (component part/kit numbers)
- AIM Print Test Board and Kit
- Pb-Free HASL PCB Finish
- Custom PC Practice Boards and Kits
- CircuitCAM Software—Aegis
- Single Pack Hand Solder Kits
- PC000 Zero-Ohm SMD Resistor PCB/ Kit
- PC003 Solder Practice PCB/Kit
- PC005 BGA Variable Pitch and Array PCB/Kit
- PC007 MLF® Test PCB/Kit
- PC008 Solder Practice PCB/Kit
- PC009 Mixed Technology PCB/Kit
- PC011 BGA Fine Pitch PCB/Kit
- SMTA Saber Evaluation PCB/Kit
- PC012 BGA Global Daisy-Chain Test Kit
- PC013 Though-Hole Solder Training Kit
- PC014 IPC 9850 Attribute Defect Rate Kit
- PC015 Rework Kits
- PC016 IPC Compliant Hand Soldering Kit
- PC020 Practical SMT Kit
- PC200 PoP 14mm Board & Kit—Amkor
- PC200 PoP 12mm Board & Kit—Amkor
- WTK-1 Terminal and Wire Kit
- PC031 Lead-Free Process Capability Validation Kit—Cookson
- Flip Chip Test Die Kits—FlipChip Int'l
- µBGAPC Boards and Kits—Tessera
- Omni Training Kits
- Laser Cut Metal Mask Stencils
Nearly all package types are now available in lead-free formulations and dummy packages are available as small as 0402 metric.FREE CATALOG
See our illustrated design guide/catalog for an extensive list of dummy components, SMD production tools and equipment, PCB practice kits and other products designed to save you money and improve your process.
Attribute Defect Rate Kit checks out pick and place machines.
IPC-9850 includes test methods for determing various SMT placement equipment attributes, including repeatability, accuracy and attribute defects. Each of these tests requires specific material and this new test board and kit from Practical Components provides the solution for conducting the attribute rate defect testing. The applicable section from IPC-9850 is 4.1, where attribute defects are defined as components placed upside down, tombstoned, on side, missing or extra part, dmaged lead(s), damaged part(s), completely off land, or wrong polarity. Testing requires the placement of 88,000 components on 20 boards to attain reasonably accurate test results. Practical Components 9850 Kit will provide you with enough components and boards to meet this guideline. While IPC-9850 requires the placement of components on sticky tape (included), these boards can also be printed with solder paste and reflowed.
Each board contains the lands (multiple orientations) for 4,400 components (440 SOT23s, 440 SO8s, 880 0603SMCs, 880 0603 SMRs, 880 0402SMCs and 880 0402SMRs). Test material is available from Practical as single boards or complete kits with all the necessary dummy components. On request, this board comes with demonstration versions of CircuitCAM and CheckPoint manufacturing software, ready-to-run CircuitCAM Project Files (CPFs) and Gerber and X, Y Theta data at no extra charge.
Board Size: 11" x 11"
FR4 Material, .062" Thick, HASL Finish
| PC014 (IPC 9850) Kit | ||||||
|---|---|---|---|---|---|---|
| Part Description | Qty Per 5 Kits |
Qty Per 10 Kits |
Qty Per 20 Kits |
|||
| SOT23-TR | 3,000 | 6,000 | 12,000 | |||
| SO8GTR-3.8mm | 2,500 | 5,000 | 10,000 | |||
| 0402SMC-PA | 10,000 | 10,000 | 20,000 | |||
| 0402SMR-PA | 10,000 | 10,000 | 20,000 | |||
| 0603SMC-PA | 8,000 | 12,000 | 20,000 | |||
| 0603SMR-PA | 5,000 | 10,000 | 20,000 | |||
| Sticky Tape | 1 Roll | 2 Rolls | 3 Rolls | |||
| PCB014 | 5 | 10 | 20 | |||
| Kit Order Number: | PC014-0-05 | PC014-0-10 | PC014-0-20 | |||
- Gerber and X, Y Theta data included at no charge.
- Digitized files provided by Aegis Software included at no charge.
